Eclipse EGO User Manual page 22

Using the Display Menu Rate of Fire Option
As both the
Menu are covered in their respective sections in the
following pages we will start by looking at the Rate of
Fire option.
Break Beam Sensor System Indicator
Maximum Rate of Fire Achieved
22
TIMER SHOTS
and the options from the
Current Rate of Fire
Battery Level Indicator
DISPLAY
The Rate of Fire
can monitor your rate of fire whilst using the Eclipse
Ego. The Rate of Fire screen looks like the screen to
the left.
With the Break Beam Sensor System enabled and
paint present, the rate of fire is only limited to the speed
of your loader. To achieve the highest rates of fire we
recommend using a high-speed loader such as the
HALO, Evolution 2 or Q-loader. With the Break Beam
Sensor System enabled, and no paint present, the rate
of fire will be 0, as your Eclipse Ego will not be able to
fire.
To use the Rate of Fire screen without shooting paint,
simply switch the Break Beam Sensor System off using
Raise
the pushbutton. In this scenario, the Rate of Fire is
only limited to whatever value you have selected in the
MAX ROF
option in the
The Rate of Fire Indicator records every pull and
release of the trigger over a period of one second and
calculates the number of valid shots that were fired
during that period.
The current Rate of Fire is displayed in the top right
hand corner. The maximum Rate of Fire that has been
achieved is displayed in the bottom right hand corner.
To reset the maximum Rate of Fire simply push and
Lower
hold the pushbutton for a 1 second period.
(ROF)
option is a means by which you
TIMING
Menu.