Eclipse EGO User Manual page 35

Table of Contents

Advertisement

Setting the Trigger Pull Time
Filter
Scroll through the
Menu until the
displayed.
The current value of the trigger pull time is shown on
the right hand side of the display
Select
Press the
pushbutton to enter the edit function
and the edit indicators will appear on the display.
Raise
Press and release the
PULL
value in 1-millisecond increments. Press and hold
Raise
the
pushbutton to increase the
rapidly.
Setting the Trigger Release Time
Scroll through the
parameter is displayed.
The current value of the trigger release time is shown
on the right hand side of the display
Select
Press the
and the edit indicators will appear on the display.
Press and release the
RELEASE
value in 1-millisecond increments. Press and
Raise
hold the
more rapidly.
FIGURE 4.15
PULL
parameter is
(See Figure 4.14)
pushbutton to increase the
PULL
value more
Filter
RELEASE
Menu until the
(See Figure 4.15)
pushbutton to enter the edit function
Raise
pushbutton to increase the
RELEASE
pushbutton to increase the
Lower
Press and release the
pushbutton to decrease the
PULL
value in 1-millisecond increments. Press and hold
Lower
the
pushbutton to decrease the
rapidly.
Select
PULL
Press
to save the
value and the edit
indicators will disappear from the display to indicate that
the value has been accepted. You have now returned to
Filter
the
Menu.
Assuming the TT filter is correctly set, the
can be set to 0ms for fastest trigger operation.
Press and release the
RELEASE
value in 1-millisecond increments. Press and
Lower
hold the
pushbutton to decrease the
more rapidly.
Select
Press
to save the
indicators will disappear from the display to indicate that
the value has been accepted. You have now returned to
Filter
the
Menu.
Assuming the TT filter is set correctly, the
value
can be set to 1ms for fastest trigger operation. On short
triggers this may have to be increased to prevent 'Double
Taps'.
FIGURE 4.14
PULL
value more
PULL
parameter
Lower
pushbutton to decrease the
RELEASE
value
RELEASE
value and the edit
RELEASE
parameter
35

Advertisement

Table of Contents
loading

Table of Contents