Eclipse EGO User Manual page 38

The Factory Setting Menu
The Factory settings menu gives the user a simple way
of resetting their Eclipse Ego to the factory settings,
FIGURE 4.17
without having to individually go through and adjust
each parameter.
If the user has chosen to deviate from the factory
settings,
FACTORY
Press the
of the options on the
has been displayed, pressing the
cause the first option to be displayed.
Press the
the options on the
has been displayed, pressing the
cause the last option to be displayed.
Press the
option.
To reset the Eclipse Ego to Factory Settings, select the
YES
To keep the Eclipse Ego settings the same, select the
38
NO
FACTORY NO
will be displayed when entering the
(See Figure 4.17)
Menu
Lower
pushbutton to scroll down through each
Factory
Menu. Once the last option
Lower
Raise
pushbutton to scroll up through each of
Factory
Menu. Once the first option
Raise
Select
pushbutton to select the displayed
option.
option.
It is not possible to select
FACTORY
Menu, as this is only displayed when Factory
Settings are not adhered to.
Selecting
leaving the original choice unchanged and return you to
Set-up
the
Using the Factory Menu
Scroll through the
pushbutton will
parameter is displayed and then press the
pushbutton to enter the
pushbutton will
CUSTOM
as an option from the
CANCEL
will terminate the selection mode
(See Figure 4.18)
Menu.
Set-up FACTORY
Menu until the
FACTORY (See Figure 4.18)
menu
Select
FIGURE 4.18