FIGURE 6.70
Cleaning and
Lubricating the Bolt
This procedure can be performed with the Eclipse Ego
gassed up as well as de-gassed.
Raise the bolt pin and remove the bolt and bolt pin from
the Eclipse Ego marker body.
Using a dry Q-tip remove any paint or grease
from the surface of the bolt and seals on the bolt
(See Figure 6.70)
.
Lubricate the two bolt seals and replace the bolt, locking
the bolt pin into the designated slot in the rammer.
Note: We recommend the use of light paintgun
oil throughout the Eclipse Ego.
53