Display Menu Tree; Maintenance - Eclipse EGO User Manual

Advanced Set-Up
This section contains more detailed information on
setting up the Eclipse Ego.
• Setting the Trigger
• The Set-Up Menu
• The Mode Menu
• Using the Mode Menu.
• The Timing Menu
• Maximum Rate of Fire (MAX ROF)
• Dwell (DWELL)
• First Shot Drop Off (FSDO)
• The Filter Menu
• Using the Break Beam Breech Sensor System
• Setting the Empty Breech Detection Time (EMPTY)
• Setting the Ball Detection Time (BALL)
• Using the Trigger Filtering
• Setting the Trigger Pull Time (PULL)
• Setting the Trigger Release Time (RELEASE)
• Using the Trigger Transition Filtering
• Setting the Trigger Transition Band (TT BAND)
• Setting the Trigger Transition Tolerance (TT TOL)
• The Factory Settings Menu
• Using the Factory Settings Menu.

Display Menu Tree

This section provides a quick reference to the User
Interface.

Maintenance

This section acts as a guide to performing routine
maintenance.
• Cleaning the Break Beam Sensor System.
• Stripping and Cleaning the Inline Regulator.
• Stripping and Cleaning the LPR.
• Cleaning and Lubricating the Rammer.
• How to fully strip down the Eclipse Ego (including
Exhaust Valve replacement).
• Assembling the Eclipse Ego.
• Cleaning and Lubricating the bolt.
Fault Finding
This section provides information on how to resolve any
problems that might arise with your Eclipse Ego.
7