Eclipse EGO User Manual page 51

FIGURE 6.57
Remembering to include the valve spring, begin to insert the rammer
assembly into the Eclipse Ego body, taking care not to damage any of the
low-pressure hosing. Line the rammer assembly up so that the minifold can
FIGURE 6.58
slide into the groove in the bottom of the Eclipse Ego body
By applying slight pressure to the back of the rammer assembly
(See Figure 6.58)
tension, so that the valve plug can be replaced
Line the low-pressure hose up neatly in the groove provided in the Eclipse
Ego body, so that it doesn't get in the way when re-attaching the grip frame
(See Figure 6.60)
(See Figure 6.61)
the FRM
FIGURE 6.59
Replace the frame tag, and using a 1/8th" hex key secure the frame tag in
(See Figure 6.62)
place
Note: Do not over-tighten frame tag screw
FIGURE 6.60
FIGURE 6.61
, hold the rammer in place against the exhaust valve spring
(See Figure 6.59)
and attach low-pressure hosing to the barb at the back of
.
.
FIGURE 6.62
(See Figure 6.57)
.
.
51