Eclipse EGO User Manual page 55

Symptom
Eclipse Ego leaks down barrel.
Gas vents quickly down barrel as soon
as gassed up.
The marker is chopping or trapping paint.
Eclipse Ego fires yet bolt doesn't move.
Possible Cause
Leaky Exhaust Valve.
Damaged Valve Seat.
Incorrect seal on front of rammer housing.
The exhaust valve has become jammed
in the brass valve guide
The Break Beam Sensor System is
switched off.
The bolt is dirty, causing the sensor
system to incorrectly detect a retracted
bolt.
The Break Beam Sensor System is dirty
causing the incorrect detection of paintballs.
Bolt pin is not located in rammer
correctly.
Solution
Replace exhaust valve.
Replace Rammer Housing.
Replace front seals on rammer housing
with 016 seals.
Replace exhaust valve and brass value
guide as necessary (see Maintenance
Section).
Switch on the Break Beam Sensor
System.
Increase the breech open time.
Clean the bolt.
Clean the Break Beam Sensor System.
Lift bolt pin and line up bolt with position
of rammer correctly (see Maintenance
Section).
55