Lubricate all of the seals on the
rammer shaft and replace the
rammer into the rear of the Eclipse
FIGURE 6.31
Ego body with the bumper at the
(See Figure 6.34)
back
light paintgun oil.
Replace the rammer cap, using the
5/32nd" hex key to secure it into the
Eclipse Ego body
FIGURE 6.32
FIGURE 6.33
Noting the position of the rammer
in the Eclipse Ego body
6.36)
, replace the bolt and locate
the bolt pin into the designated
. Note: Use
groove in the rammer shaft
(See Figure 6.37)
FIGURE 6.34
(See Figure 6.35)
.
FIGURE 6.35
(See Figure
.
FIGURE 6.36
FIGURE 6.37
47