Eclipse EGO User Manual page 30

The Mode Parameter
Mode
The
of the Ego. Please Note: Certain modes may only be
available in certain countries and on certain models of
Eclipse Ego.
Scroll through the
is displayed. The current firing mode is shown on the
right-hand side of the display. To change the
parameter press
(See Figure 4.8)
appear
Press the
each of the available firing mode options. Once the
last option has been displayed, pressing the
pushbutton will cause the first option to be displayed.
Press the
the available firing mode options. Once the first option
has been displayed, pressing the
cause the last option to be displayed.
Press the
to the displayed option.
Selecting
30
Parameter is used to control the firing mode
Set-up Mode
menu until the
Select
and the edit indicators will
Lower
pushbutton to scroll down through
Raise
pushbutton to scroll up through each of
Raise
pushbutton will
Select
pushbutton to change the firing mode
BACK
will return the display to the
The Timing Menu
TIMING
The Menu provides access to parameters which control the Ego's
firing cycle.
Scroll through the
Select
. This will display
parameter
(See Figure 4.7)
Mode
Lower
Lower
Press the
TIMING
the Menu. Once the last item has been displayed, pressing the
Lower
pushbutton will cause the first item to be displayed.
Raise
Press the
Set-up
Menu.
TIMING
Menu. Once the first item has been displayed, pressing the
pushbutton will cause the last item to be displayed.
Select
Press the
BACK
Selecting
Set-up TIMING
Menu until is displayed and then press
MAX ROF
the first item on the
pushbutton to scroll down through each of the items on
pushbutton to scroll up through each of the items on the
pushbutton to edit the displayed parameter.
Set-up
will return the display to the
TIMING
Menu
FIGURE 4.7
Raise
Menu.