Configuration
Software
The FOX3 201 transmitter can be easily configured using Extron Product Configuration
Software (PCS). This section describes the software installation and communication (see
the FOX3 T 201 PCS Help File for detailed control information). The topics covered in this
section are:
•
•
•
Software/Firmware Installation
Visit
NOTES:
1.
2.
3.
Software/Firmware Installation
Connecting to PCS
Software Overview
www.extron.com
to download and install the PCS software.
•
Also download the latest versions of software and firmware for your product.
An Extron Insider account is required to download either firmware or software
•
Mouse over the Download link at the top of the page (see figure 12,
Figure 12.
Software Links on Download Screen
Click the appropriate link on the drop-down list.
For software, either click the Software link (
directly on that link (see the PCS Product Configuration Software link
to
step 5
on page 27.
For firmware, click the Firmware link (
If there is no direct link to your software, click the Software link (
) or, if the software is listed, click
2
).
4
FOX3 T 201 Transmitter • Configuration Software
).
1
) and skip
3
).
2
26