Product Configuration Software; Software/Firmware Installation - Extron electronics DTP3 T 101 D User Manual

Product Configuration Software

The DTP3 T 101 D can be easily configured using Extron Product Configuration Software (PCS). This section
describes the software installation and communication (see the DTP3 T 101 D PCS Help File for detailed control
information). Topics include:
•

Software/Firmware Installation

• Connecting to PCS
•
Software Overview
Software/Firmware Installation
Visit www.extron.com
NOTES:
•
Download the latest version of software and firmware of your product.
•
An Extron Insider account is required to download and use the firmware or software.
1. Mouse over the Download tab at the top of the homepage (see figure 10,
Figure 10. Software Links on Download Screen
2. Click the appropriate link on the drop‑down list. The Download Center page opens.
For software, either click the Software link (
PCS Product Configuration Software link
NOTE: If there is no direct link to your software, click the Software link (
For firmware, click the Firmware link (
3. Scroll down to the alphabetic navigation bar (see figure 11).
Figure 11. Software Installation
4. Click the appropriate letter to locate the software or firmware.
to download and install the PCS software.
).
4
) or, if the software is listed, click directly on that link (see the
2
) and skip to step 5
3
DTP3 T 101 D • Proudct Configuration Sotware
).
1
on page 17.
).
2
16