Insertion - Extron electronics FOX3 T 201 User Manual

Fiber optic hdmi transmitter
Hide thumbs Also See for FOX3 T 201:
Table of Contents

Advertisement

RS-232 Insertion
A user can connect a control system to send and receive RS-232 data over the fiber and
the captive screw port of the transmitter and receiver.
Captive Screw Insertion
A user can connect an RS-232 signal from a control system to an endpoint and pass that
signal over the fiber to the connected endpoint. An RS-232 signal must be inserted in the
RS-232 port on the transmitter or receiver and bidirectional fiber must be used.
The RS-232 signal settings are:
Baud rate: 9600 (default) to 115200
Data bits: 5 to 8 (default)
The RS-232 insertion method must be set to Captive Screw Insertion via PCS (see the
FOX3 SR 201 Help File) on both endpoints passing the control signal.
Example of a bidirectional fiber system (see figure 11):
On the FOX3 transmitter and receiver, configure the RS-232 Insertion via PCS.
The control system then sends a control command:
The response from the display is sent back to the control system.
Extron
FOX3 T 201
Fiber Optic Transmitters
POWER
INTPUTS
FOX3 T 201
CONTROL
12V
--A MAX
RS-232
IR
AUDIO
HDMI
LOOP OUT
Tx Rx
G
Tx Rx
RS-232
HDMI
Laptop
Ethernet/PoE
Extron
TLP Pro 725T
7" TableTop
TouchLink Pro
Touchpanel
Figure 11.
Into the transmitter Control RS-232 port.
Out of the transmitter SFP A port to the receiver SFP A IN port.
To the receiver captive screw port.
Into the display to take some action.
Fiber
Extron
FOX3 SR 201
Fiber Optic Receiver
REMOTE
A
B
RS-232
R
Tx Rx G
LAN
OUT IN
OUT IN
COM 1
COM 2
Tx Rx
G
RTS CTS
Tx Rx
POWER
VOL
RELAYS
12V
--A MAX
V C G
1
2
TCP/IP
Network
Ethernet
Typical Captive Screw Insertion Configuration
Stop bits: 1 (default) to 2
Parity: Odd, Even, or None (default)
POWER
FOX3 SR 201
OUTPUTS
CONTROL
REMOTE
12V
0.7 A MAX
AUDIO
RS-232
RS-232
IR
HDMI
Tx Rx
G
Tx Rx
Tx Rx G
DIGITAL I/O
IPCP PRO 250
Extron
IPCP Pro 250
G
1
2
3
4
G
eBUS
IR/S
IP Link Pro
C
+ V + S - S G
Control Processor
S
G
LAN
PWR OUT = 6W
FOX3 T 201 Transmitter • Installation and Operation
A
B
R
OUT IN
OUT IN
LAN
RS-232
HDMI
Projector
15

Advertisement

Table of Contents
loading

Table of Contents