Audio Configuration; Audio Embedding; Audio Input Gain; Audio Input Configuration - Extron electronics FOX3 T 201 User Manual

Audio Configuration

Audio Embedding

The FOX3 supports a single audio signal to pass LPCM-2CH. The audio input sent over
the fiber output can be configured via PCS (see the FOX3 T 201 PCS Help File) or SIS
command (see

Audio Input Gain

Adjust the transmitter gain level for the analog audio input via PCS (see the FOX3 T 201
PCS Help File). The analog audio input can be adjusted from -18 dB to +24 dB in 1 dB
steps.

Audio Input Configuration

Select the audio on the input of the transmitter via PCS (see the FOX3 T 201 PCS Help File)
or SIS command (see
The audio input options are:
•
•
•

Audio Mute

Mute audio on the Loop Out, HDMI output, and analog audio output individually via PCS
(see the FOX3 T 201 PCS Help File) or SIS commands (see
or Analog Audio Out
Input audio selection
Input audio
Auto (default) — The transmitter selects between digital and analog audio based on the
digital audio input signal.
• Digital audio is selected when embedded audio is present on the HDMI input.
Analog audio is selected when digital audio is not detected.
•
Force Digital — Digital embedded audio is passed to the local HDMI and fiber output.
Force Analog — Analog audio is passed to the local HDMI and fiber output.
on page 22).
on page 25). Select digital, analog, or auto.
selection).
Audio mute — Digital Output
FOX3 T 201 Transmitter • Installation and Operation 16