Table of Contents
Advertisement
Figure 30.
2.
Edit the Device Name as desired.
3.
When finished editing, click SAVE to confirm your changes or CANCEL to close the
window without making changes. Clicking the X in the upper-right corner of the screen
also closes the window.
Device Status Panel
The Device Status panel (see figure 29,
time, time zone, the amount of time the device has been running (Uptime), and the internal
temperature in degrees Celsius.
To set the date and time:
1.
Click EDIT (see figure 31 [left],
Settings panel opens to allow edits (right).
Figure 31.
2.
Edit the Date/Time and Timezone as desired.
3.
When finished editing, click SAVE to confirm your changes or CANCEL to close the
window without making changes. Clicking the X in the upper-right corner of the screen
also closes the window.
4.
Alternatively, click SYNC TO PC (
Network Settings Panel
In the Network Settings panel (see figure 29,
subnet mask, and gateway address for your FOX3, and turn DHCP On and Off.
Device Info Panel
2
) in the Device Status panel. The Device Status
1
Device Status Panel
) to set the date and time according to your PC.
2
FOX3 T 201 Transmitter • Internal Web Page
on page 36) displays the current date,
on page 36), set the IP address,
3
37
Advertisement
Table of Contents
