Product Configuration Software; Installing The Software - Extron electronics DTP T EU 332 User Manual

Product Configuration Software

This section details the Product Configuration Software (PCS), available on the Extron
website. The Windows-based PCS communicates with the switcher via the following ports:
•
•
The program is compatible with Windows 2000, Windows XP, and later.

Installing the Software

The PCS, version 2.3 or newer, and Firmware Loader are available on the Extron website.
Download and install both programs as follows:
NOTE: Steps 1 through 6, below, are also used to download a firmware update package.
1.
2 2 2 2 2 2 2 2 2 2
— OR —
2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2
2.
Configuration port — A standard USB mini-B port (see
Remote RS-232 port — A serial port on a 3.5 mm, 3-pole captive screw connector
(see item on page 8).
E
9600 Baud
• •
No parity
• •
Visit the website www.extron.com
Figure 15. Downloading a Software or Firmware Package (PCS Shown)
Click the ,
Software Firmware
operation you are performing.
DTP T EU 332, DTP T EU 232, DTP T MK 332, and DTP T MK 232 • Remote Control
8 data bits
1 stop bit
and click the
Download
1 1 1 1 1 1 1 1 1 1
, or specific firmware package link as appropriate to the
item on page 7).
B
tab (see figure 15).
3 3 3 3 3 3 3 3 3 3
26