Table of Contents
Advertisement
Product Configuration Software Control
This section introduces the Product Configuration Software (PCS), available on the Extron
website. The Windows-based PCS communicates with the switcher via the following ports:
•
•
The program is compatible with Windows 7 and later.
Installing the Software
The PCS (minimum version 4.7.0 or newer is required for the transmitter) and Firmware
Loader are available on the Extron website. Download and install both programs as follows:
NOTE: Steps 1 through 6, below, are also used to download a firmware update package.
1.
2 2 2 2
2 2 2 2
2 2 2 2 2 2
OR
2 2 2 2 2 2
2 2 2 2
2 2 2 2
2.
Configuration port — A standard USB mini-B port (see
Remote RS-232 port — A serial port on a 3.5 mm, 3-pole captive screw connector
(see
item
on page 6).
B
9600 Baud
•
•
No parity
•
•
Go to
www.extron.com
and momentarily rest the cursor over the Download tab
(see figure 19,
).
1
Figure 19.
Selecting the Download Tab
Click the Firmware or Software link (
(see
figure 20
on page 29).
8 data bits
1 stop bit
1 1 1 1
1 1 1 1
1 1 1 1 1 1
). The main download page opens
2
DTP2 T 202 FB • Remote Control
item
on page 11).
A
28
Advertisement
Table of Contents
