5.
When finished, click SAVE to
set the passwords. To close
the window without saving a
password, click CANCEL or the X in
the upper-right corner.
NOTE: Passwords can be changed
but they cannot be removed
entirely. The FOX3 must have
passwords at all times. These
fields cannot be blank.
LinkLicense Panel
The LinkLicense panel (see figure 29,
LinkLicense applied to the FOX3 device (A LinkLicense can be uploaded using the Extron
Toolbelt software. See
software).
Figure 37.
Software/Firmware Installation
LinkLicense Panel
Figure 36.
Passwords Dialog Box
on page 36) displays information about any
6
on page 26 to download the
FOX3 T 201 Transmitter • Internal Web Page
40