Table of Contents
Advertisement
9.1
Logging on to the SiteDialer
For Web Interface functionality, the unit must first be configured with some basic network information
through TTY Interface, refer to section 7.
1. To connect to the SiteDialer from your Web browser, enter its IP address in the address bar of your
web browser. It may be helpful to bookmark the logon page to avoid entering this each time.
2. After connecting to the unit's IP address, enter your login information and click OK. NOTE: The
factory default username is "admin" and the password is "dpstelecom".
3. In the left frame you will see the Event Log menu (blue) and View Settings menu (green) The
Event Log menu is used to view any activity at your site. The View Settings menu is used to view the
current configurations of your SiteDialer and for an up-to-date view of the status of alarms. The
following sections provide detailed information regarding these functions.
Fig. 8. SiteDialer Web Browser
23
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 832/864A and is the answer not in the manual?
Questions and answers