Install The Top Cover On The Node; Install The Node - Dell EMC PowerStore 1000 Installation And Service Manual

● Transfer the internal battery backup

Install the top cover on the node

Steps
1. Position the top cover over the node and align it with the slots in the sides at the rear of the node.
Figure 110. Aligning the top cover
2. Pull the top cover forward to secure it in place.
Figure 111. Securing the top cover

Install the node

Steps
1. Align the pins on the top of the node with the grooves on the top of the chassis.
2. Slide the node into the chassis until it stops, about halfway in.
88 Base enclosure service procedures
module.