Install The Fan Module; Install The Top Cover On The Node - Dell EMC PowerStore 500T Installation And Service Manual

Figure 72. Removing the fan from the motherboard

Install the fan module

Steps
1. Place the fan module into the mounting position in the node.
2. Squeeze the blue tabs and press downward to lock the fan module into position.
3. Connect the fan module power cable to the connector on the motherboard.
Figure 73. Installing the fan module

Install the top cover on the node

Steps
1. Position the top cover over the node and align it with the slots in the sides at the rear of the node.
2. Pull the top cover forward to secure it in place.
66 Base enclosure service procedures