Installing The Front Bezel; Verify The Operation Of An Added Drive - Dell EMC PowerStore 1000 Installation And Service Manual

Figure 116. Installing a drive
The activity light flashes to indicate that the spin-up sequence has begun.

Installing the front bezel

Steps
1. Align the bezel with the enclosure.
2. Gently push the bezel into place on the cabinet until it latches.
3. If the bezel has a key lock, lock the bezel with the provided key.
Figure 117. Installing the bezel

Verify the operation of an added drive

Steps
1. From PowerStore Manager, select Hardware.
2. Select the appliance where you added the drive.
3. On the Components card, under Drives, expand ExpansionEnclosure and select the drive.
The status of the drive should read Healthy. If the status is still Faulted, wait a few minutes and refresh PowerStore
Manager. If the status does not change, ensure that the drive is correctly seated, or contact your service provider.
CL5262
Expansion enclosure service procedures 93