Install A 4-Port Card - Dell EMC PowerStore 1000 Installation And Service Manual
Hide thumbs
Also See for EMC PowerStore 1000:
- Owner's manual (210 pages) ,
- Removing the hard drive (9 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Figure 43. Removing the 4-port card
Install a 4-port card
Steps
1. Align the 4-port card in the embedded module so that the ports on the front line up with the slots on the front of the
embedded module.
2. Align the white pegs beneath the holes on the 4-port card.
CAUTION:
Do not force the 4-port card into place. If the 4-port card does not smoothly seat, realign the pegs
and try again.
Figure 44. Seating the 4-port card
3. Gently push down on the upper-left circle on the 4-port card.
4. Push up on the blue tabs until they lock into place.
46
Base enclosure service procedures
Hide quick links:
Advertisement
Table of Contents
