NuVinci enviolo CT Assembly Instruction Manual page 42

Quick Start Guide
AUTOMATiQ
NuVinci Optimized enviolo
Automatic+ mit Kiox
n
C
Trittfrequenz einstellen
1. Außerhalb des Status-Screens
[Auswahltaste] drücken
2. Zu eShift Trittfr. navigieren
Kiox speichert letzte Auswahl.
X
n
Beim nächsten Öffnen des
D
Menüs Einstellungen
erscheint sofort die Option
eShift Trittfr.
3. Mit Tasten [+] und [–] Tritt-
frequenz wählen
enviolo Assembly Instruction
Gangkalibrierung
Kalibrierung des stufenlosen Getriebes
1. Mit Tasten [>] und [<] Menü
Einstellungen wählen
2. Mein eBike → eShift wählen
3. Menüpunkt Kalibrierung wählen
4. Anweisungen auf dem Display
folgen
Kann im Fehlerfall auch während
X
der Fahrt erforderlich werden
Bedienung | eShift | 121
[C] enviolo AUTOMATiQ calibration - Bosch Kiox
When
•
After enviolo AUTOMATiQ assembly;
•
After firmware update;
•
When system functions are not appropriate.
How to - for Kiox:
•
Turn on the Bosch Kiox system. Select no motor assist.
•
Enter the "Settings" menu by pressing the [>] and [<] keys and
confirm your selection with the pound key [<>].
•
Use [+] and [-] to select the menu item "My eBike" and confirm your
selection with [<>] or [>].
•
Select the menu item "eShift" and confirm your selection.
•
Select the menu item "Calibration" and confirm your selection.
•
Continue to pedal while the system shifts from full overdrive to full
underdrive several times to complete the calibration process and
the screen indicates "Calibration successful".
After completion of the calibration process, the system returns to the ride
mode automatically.
[D] enviolo AUTOMATiQ Calibration - Flyer FIT
When
•
After enviolo AUTOMATiQ assembly;
•
After firmware update;
•
When system functions are not appropriate.
How
•
Turn on the Flyer system.
•
Enter the setup menu using the joystick.
•
Select "Calibration" and confirm by pressing the joystick.
•
Select "Calibrate NuVinci" and confirm by pressing the joystick.
•
Lift up the rear wheel and pedal fast and easy.
•
Start calibration by pressing the joystick again.
•
Continue to pedal while the system shifts from full overdrive to full
underdrive several times to complete the calibration process and
the screen indicates "Calibration succeeded".
42