NuVinci enviolo CT Assembly Instruction Manual page 28

AUTOMATiQ system:
INSTALLING THE SYSTEM SENSORS
C
D
Output speed rings from old automatic systems are not compatible
to the new AUTOMATiQ system and therefore do not allow for proper
function. Please ensure you use our OSS2 variant.
enviolo Assembly Instruction
Installing the
Output Speed
Ring
•
[C] AUTOMATiQ systems require an
output speed ring that must be secured
over the internal gear hub, flush with the
internal gear hub cover. Sixmagnets in
the output speed ring provide the bicycle
speed for the AUTOMATiQ system.
•
[D] Prior to installing the automatic hub
interface, assemble the output speed
ring over the right hand side of the CVP,
and secure with the included fastener.
•
The fastener may need to be unthreaded
to allow initial fitment.
•
Assemble with the larger diameter flange
outboard and the fastener inboard, flush
with the internal gear hub cover as
shown.
•
Locate the fastener portion between
spoke holes and spokes, as shown.
•
Torque the fastener to 1.0 Nm (9 in-lbs).
28