Enviolo Automatiq System - NuVinci enviolo CT Assembly Instruction Manual

Wire Harness
enviolo CT: AHI-AUT-CT-OE
enviolo CO: AHI-AUT-CO-OE
enviolo TR: AHI-AUT-TR-OE
enviolo CA: AHI-AUT-CA-OE
enviolo SP: AHI-AUT-SP-OE
HI Pin Cable Pin Color
1 2 Yellow
2 3
Blue
3 4
Red
4 1 Black
NOTE: Pin-Numbering on AHI-side is different from Pin-
Numbering on Cable-side
* This connector is only required if the counterplug is not provided by the drive system
manufacturer. Please contact the drive system manufacturer for further information. For Yamaha
we offer an alternative cable. Please contact the sales team for further information.
AUTOMATiQ Wire Harness
This diagram provides you an overview of the system connections.
I-Harness
enviolo Assembly Instruction
Near
silent
J6
Stepless
shi ing
J5
Effortless shi ing,
even under load
Hirose connector:
Greater gear
-------OR -------
ratio range
No additional
shi er
Wireless
connection
Function
Mobile app
customisation
V_BAT
GND
Comfortable
CAN_L
pedaling at your
CAN_H
desired preset
cadence
0,400 m
J15
Wire diameter = 3.7 mm
WIRE-AT3-400-OE
WIRE-AT3-600-OE
WIRE-AT3-DS-OE
enviolo AUTOMATiQ is a CAN Bus / BLE system
CAN LOW
GND
V_BAT
CAN HIGH
J6 (connector side) / Mini F
J5 (AHI side) / Mini F
I-Harness
0,72 m
J16
Available from drive
system manufacturer.
J15/Hirose
J16/Hirose
12