Adjusting Cable Slack - NuVinci enviolo CT Assembly Instruction Manual

Manual system:

ADJUSTING CABLE SLACK

X
7
Y
8
enviolo Assembly Instruction
Adjusting Cable Slack
•
[X] Cable slack can be adjusted with the barrel adjusters (7) at the
controller.
•
[Y] Cable slack can be determined by pulling lightly on the cable
housing (8) at the controller and noticing any slack. ~0.5mm of slack is
ideal.
•
Cable slack of more than 2.0mm may cause decreased shift
performance and shift cable durability.
•
For rear wheel removal, additional cable slack may be desired to ease
shift cable hardware removal, which can be obtained with the barrel
adjusters (7).
26