NuVinci enviolo CT Assembly Instruction Manual page 40

Quick Start Guide
AUTOMATiQ
1. System Functionality
The AUTOMATiQ system is integrated within the eBike drive system and provides automatic shifting
for the rider at all times. It can be utilized with the drive system remote controller, which usually offers
both fully automatic and manual shifting options. If supported by the drive system, the rider has the
option to switch between "manual" and "automatic" modes by pressing the "mode" button (6) on
the controller housing. For details, please look at your drive system manual, since the integration is
handled differently by type of drive system.
The internal gear hub can can be shifted ~50% while stationary. The AUTOMATiQ system will
intelligently wait for pedaling or wheel movement if wide ratio ranges are commanded while
stationary.
2. Setup
AUTOMATiQ Mode
In automatic mode the system automatically adjusts the ratio to
maintain the rider´s preferred cadence. The rider can choose their
ideal cadence setting through selection in the eBike drive system
menu.
Manual Mode
In manual mode the rider is able to shift on their own electronically.
The eBike drive system usually integrated this functionality by
simulating gears.
Note: In case of the integration into the Bosch Intuvia,
Nyon or Kiox displays a long press on the info button will
get you directly to the cadence menu without having to
click through all menu items.
enviolo Assembly Instruction
3. Calibration
On the first set up or after system maintenance
or incorrect functionality the system has to be
calibrated.
1. Turn system power on. Select no motor assist.
2. Initiate the calibration process through the drive system
menu.
For details review the eBike drive system manual.
3. Pedal the bicycle lightly through the entire calibration
procedure (preferable on a stand with the rear wheel off the
ground), while the system shifts from "low" to "high" ratio
multiple times and completes the calibration.
Should you be using our app you can also access the calibration through
the configuration tab.
40