Manual system:
INSTALLING THE REAR WHEEL
U
C
V
enviolo Assembly Instruction
A
A
B
Boss
Installing the Rear
Wheel for Manual
Variants
1. Place the rear wheel into the rear frame, making
sure not to obstruct shift cables.
[U]
2a.
For the variants enviolo CT/TR/CO/CA:
Slide one no-turn washer (A) each onto each axle
end. The serrations of the no-turn washer must
bear against the dropout of the frame. The
rectangular boss must engage in the dropout of
the frame.
[V]
Mount the axle nuts (B) and tighten to 30-
40Nm (266-350 in-lbs).
A
24