Key Function/Multifunction Registration K1-151 - NEC Xen Alpha Features And Specifications Manual

K-1
Key Function/Multifunction
Registration
Xen Alpha
F The system can be registered as a Key Function (KF) or a Multifunction (MF) telephone
EATURE
D system using system programming.
ESCRIPTION
S The feature applies to all Multiline telephones and Single Line Telephones.
TATION
A
PPLICATION
O
PERATION
P
ROCEDURE
Not applicable.
R All programming functions associated with this feature are listed in the following table. Some
ELATED
P functions must be programmed before the feature is operational and other functions are
ROGRAMMING
optional. The optional functions can affect how the feature operates.
!
S
ERVICE
C
ONDITIONS
!
!
!
!
Features & Specifications, Key Function/Multifunction Registration
A6-506000-642-02
Function
Number
009 Outgoing Call Line Selection
209 Outgoing Call Priority Mode
331 → 336 Automatic Line Selection for Trunk Lines 1 → 6
When a system is set to KF, the external line key must be pressed to access the external
line. External calls cannot be made from internal dialtone using a trunk access code
J
( ). Calls can be made from internal dialtone if a specified trunk access code is dialed
FC
first ( + X) (X = Trunk Number 1
When the system is set to multifunction, external lines can be accessed from internal
dialtone by dialling the trunk access code (
When the system is set to KF, the following external calls are prohibited:
• Prime Line with Automatic Trunk Selection
• Speed Dial with Automatic Trunk Selection
• Last Number Redial with Automatic Trunk Selection
Key function or multifunction selection is made in system programming using Function
"009 – Outgoing Call Line Selection".
In KF mode, single line telephones can be used for internal calls and can access external
lines using the trunk access code (
Function Name
→
4).
J
).
J
).
Release 1.0
Required
(Y)es or
(N)o
N
N
N
K-1, Page 151