Table of Contents
Advertisement
8.
Brewer Number
9.
Location
10.
Absolute
Humidity
11.
CUT Header
12.
Clock Source
13.
Time (CUT)
14.
Software
Version
15.
Zenith Angle
16.
Communication
Activity
17.
Moisture Index
18.
Current Activity
19.
Most Recent
Measurement
20.
Ave. of Day's
Measurements
21.
Current
Summary
48
- specifies constants for the Brewer
159
- adjust using the NO command
- determines Site specific information
Saskatoon
- change location with LL command
- change Site information with LF command
- if the Brewer is fitted with a moisture sensor option, this
2.7 g/m3
field indicates the amount of moisture in one unit volume
of air in the Brewer enclosure.
- reminder that time is Co-ordinated Universal Time
C.U.T
(Greenwich Mean Time)
- indicates if the System is using the Brewer Clock (I) or
I or E
the Computer clock (E).
- Brewer clock can be toggled ON or OFF in the
Configuration File with the IC command
- indicates the system time, and should be within 20
15:32:19
seconds of GMT for proper tracking.
- adjusted with TI
- the Version number of the Brewer Software
374f
-the current Solar Zenith Angle
45.76
- these fields were originally intended to monitor
in: out:
communications between the Computer and the Brewer
-As Computer speed increases, the usefulness of these
indicators decreases
-The Data Set is a much better indicator of
Communications.
- used to indicate if the desiccant needs changing.
2
- change the desiccant if index values are consistently
greater then 10.
- Comments about what the Brewer is currently doing.
- Most recent successful measurements of a certain type
429.4
(ds O3, zs O3 and ds SO2).
- Average of all successful measurements of a certain
430.7
type taken in the current day.
Lists most recent data for: DUV, SL R6, time and temp
of recent HG, current temp.
MKIV OPERATOR'S MANUAL
Advertisement
Table of Contents
