Chapter4 Trigger Command; Trigger[:Immediate]; Trigger:delay - ITech CalPower IT6302 Programming Manual

TRIGger[:IMMediate]

This order is used to generate a trigger signal when trigger source is in BUS
mode. The function of this order is similar to *TRG.
Command syntax
*TRIGger[:IMMediate]
Arguments
None

TRIGger:DELay

This command is used to set the delay time for triggering, which defaults to
zero. When the time is set to zero, the trigger will be immediately responded.
Command syntax
TRIGger:DELay <nr1>
Arguments
Times
Unit
S
Query syntax
TRIGer:DELay?

Chapter4 Trigger Command

Copyright© Itech Electronics Co., Ltd.
Trigger Command
19