Chapter6 Current Setting Commands; [Source:]Current[:Level][:Immediate][:Amplitude]; [Source:]Current[:Level]:Up[:Immediate][:Amplitude] - ITech CalPower IT6302 Programming Manual

Chapter6 Current Setting Commands

[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]

This command is used to set the current value of current channel.
Command syntax
[SOURce:]CURRent [:LEVel] <NRf>
Arguments
num|MIN|MAX|UP|DOWN|DEF
Unit
A mA
*RST Value
MIN
Example
CURR 3A,
Query syntax
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]?
Arguments
[MIN|MAX]
Example
CURR?, CURR? MAX, CURR?MIN
Returns
<NR2>
[SOURce:]CURRent[:LEVel]:UP[:IMMediate][:AMPLitud
e]
This command is used to increase a current step for current channel.
Command syntax

[SOURce:]CURRent[:LEVel]:UP[:IMMediate][:AMPLitude]

Arguments
None
CURR 30mA, CURR MAX,
Copyright© Itech Electronics Co., Ltd.
Current Setting Commands
CURR MIN
22