Chapter9 Measurement Commands; Measure[:Scalar]:Current[:Dc]; Fetch:current[:Dc]; Measure[:Scalar][:Voltage][:Dc] - ITech CalPower IT6302 Programming Manual

Chapter9 Measurement Commands

MEASure[:SCALar]:CURRent[:DC]?

FETCh:CURRent[:DC]?

These two commands are used to read the output current of power supply.
Command syntax
MEASure[:SCALar]:CURRent[:DC]? <nr>
FETCh:CURRent[:DC]? <nr>
Arguments
CH1|CH2|CH3|ALL
Returns
If optional parameter CH1|CH2|CH3 is applied to specify measure channel,
return actual current of the specified channel;
If optional parameter All is applied, return actual current of all channels;
If no optional parameter is applied, return actual current of current channel.
Unit
A
Example
MEAS:CURR?
FETC:CURR?

MEASure[:SCALar][:VOLTage][:DC]?

FETCh[:VOLTage][:DC]?

These two commands are used to read the output voltage of power supply.
Command syntax
MEASure[:SCALar][:VOLTage][:DC]? <nr>
FETCh[:VOLTage][:DC]? <nr>
Arguments
CH1|CH2|CH3|ALL
Returns
If optional parameter CH1|CH2|CH3 is applied to specify measure channel,
return actual voltage of the specified channel;
Copyright© Itech Electronics Co., Ltd.
Measurement Commands
29