Status:operation:enable; Status:operation:instrument[:Event]; Status:operation:instrument:enable - ITech CalPower IT6302 Programming Manual

Related Command

STATus:OPERation:ENABle

STATus:OPERation:ENABle
This command can set the parameter of operation event enable register.
Setting parameter can determine which bit value of operation event register is 1
and the bit will cause OPER of status byte register to be 1.
Command syntax
STATus: OPERation:ENABle <NRf>
Arguments
0~255
Default set
Refer to *PSC command
Example
STATus: OPERation:ENABle 128
Query syntax
STATus: OPERation:ENABle?
Returns
<NR1>

STATus:OPERation:INSTrument[:EVENt]?

This command can query the parameter of operation event register in the
channel. After executing this order, the register is reset.
Query syntax
STATus:OPERation:INSTrument[:EVENt]?
Arguments
None

STATus:OPERation:INSTrument:ENABle

This command can re-write the parameter of operation enable register in the
channel.
Command syntax
STATus:OPERation:INSTrument:ENABle
Arguments
Register parameter
Copyright© Itech Electronics Co., Ltd.
System Commands
15