[Source:]Channel:output[:State]; [Source:]Output:protection:clear - ITech CalPower IT6302 Programming Manual

[SOURce:]CHANnel:OUTPut[:STATe]

This command is used to control the output state (ON/OFF) of the current
channel.
Command syntax
[SOURce:]CHANnel:OUTPut[:STATe] <bool>
Arguments
0|1|ON|OFF
*RST Value
OFF
Query syntax
[SOURce:]CHANnel:OUTPut[:STATe]?
Returns
0|1

[SOURce:]OUTPut:PROTection:CLEar

This command is used to clear the protection state.such as OVP,OTP.
Command syntax
[SOURce:]OUTPut:PROTection:CLEar
Arguments
None
Copyright© Itech Electronics Co., Ltd.
Output Commands
21