Overview; Installation Tips - Rekluse CoreEXP 3.0 Installation Manual

OVERVIEW

This kit replaces the OE (Original Equipment) or "stock" clutch
pack.
• This kit will replace all the OE drive plates, pressure plate, the
pressure plate springs and screws, and the inner clutch hub.
Do not dyno test this product without reviewing the
included dynamometer document.
• This kit includes extra EXP springs, which can be used to
tune for your desired engagement. See the EXP tuning
options section in this document for specific tuning
information.

INSTALLATION TIPS

• Read the separate included Safety
Information document before operating
the vehicle with the product installed.
• Read this entire document before
performing any steps.
• If you install this product for a customer or another person,
instruct them to read the Safety Information document and
the Installation and User Guide before operating the bike
with the product.
• Videos related to this product can be viewed online at
www.rekluse.com/support/videos.
• Protect eyes and skin – wear safety glasses and work gloves.
Work in a well ventilated area.
• Use the torque values listed in the instructions. Otherwise, use
the torque specifications found in your OE service manual.
• Visit www.rekluse.com/support for a full parts fiche illustration
and part numbers.
Doc ID: 191-6206A
Doc Rev: 062818
Pg. 3