Install The Pressure Plate - Rekluse CoreEXP 3.0 Installation Manual

INSTALL THE PRESSURE PLATE

1. Index the lining plate onto the backside of the Rekluse
pressure plate, aligning the plate teeth with the machined
notches in the pressure plate.
2. Install the OE throw-out through the backside of the Rekluse
pressure plate.
Note: 1993-2003 Sportster models:
Install the included throw-out spacer before installing the throw-
out into the pressure plate.
Doc ID: 191-6206A
Doc Rev: 062818
Pg. 21