Table of Contents
Advertisement
14. Use a pair of pliers to remove and discard the clutch spring
retaining ring.
15. Remove the OE clutch Belleville spring and pressure plate
and set them on a workbench.
16. Use a 9/16" open-ended wrench to hold the clutch tool shaft
in place. Slowly turn the clutch tool handle
counterclockwise until it spins freely.
Pg. 10
Doc ID: 191-6206A
Doc Rev: 062818
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreEXP 3.0 and is the answer not in the manual?