Table of Contents
Advertisement
4. On the primary chain case, use a 5/8" wrench to remove the
oil drain plug, then drain the oil into a suitable container.
5. Loosen the chain tensioner lock nut, then turn the chain
tensioner adjustment bolt counterclockwise until it spins
freely.
6. Shift the bike into 5
shaft and set it aside.
7. Remove any footboards that block the primary case and set
them aside.
th
gear, then remove the shift lever off its
Doc ID: 191-6206A
Doc Rev: 062818
Pg. 7
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreEXP 3.0 and is the answer not in the manual?