Table of Contents
Advertisement
OVERVIEW
This kit replaces the OE (Original Equipment) or "stock"
clutch pack with a Rekluse-designed high quality clutch pack
designed specifically for your bike model. The following is a
summary of what is replaced:
· All OE steel drive plates will be replaced with Rekluse
drive plates
· All OE friction disks will be replaced with Rekluse
®
TorqDrive
· The OE pressure plate springs will be replaced.
INSTALLATION TIPS
· Read the safety information sheet included with your kit.
· If you install this product for a customer or another
person, instruct them to read the Safety Information
document and the Installation and User Guide before
operating the bike with the product.
· Protect eyes and skin – wear
safety glasses and thin disposable
work gloves. Work in a well
ventilated area.
· Read this entire document before
performing any steps.
· Use clean, quality oil that meets JASO-MA or JASO-
MA2 engine oil standards for best performance.
· Rekluse offers Factory Formulated Oil™ developed
specifically for Rekluse products. Rekluse Factory
Formulated Oil is a perfect complement to any OEM or
aftermarket wet clutch. Visit
more.
· Use the torque values listed in the instructions.
Otherwise, use the torque specifications found in your
OE service manual.
friction disks and EXP disk
Doc ID: 191-6216200A
Doc Rev: 081720
www.rekluse.com
to learn
Pg. 3
Advertisement
Table of Contents
Need help?
Do you have a question about the RadiusX FTR 1200 and is the answer not in the manual?