Rekluse CoreEXP 3.0 Installation Manual page 22

3. Install the pressure plate assembly onto the clutch assembly.
4. Install the Rekluse pressure plate springs, then install the
screw sleeves. Install the pressure plate screws into the
screw sleeves.
5. Torque the pressure plate bolts to 9 ft-lb (12 N-m).
6. Reinstall the OE primary case gasket. Inspect the OE gasket
for signs of wear. If needed, replace with a new OE gasket.
Pg. 22
Doc ID: 191-6206A
Doc Rev: 062818