Lever Safety Straps; Need Additional Help - Rekluse CoreEXP 3.0 Installation Manual

LEVER SAFETY STRAPS

Your kit includes 2 Velcro-type straps to be used to secure both
the clutch and front brake levers when the bike is parked.
These straps are intended to reduce the risk of injury or damage
that may occur from the bike rolling or launching unexpectedly
with or without a rider. Use the lever safety straps every time you
park or leave the bike. Refer to the Safety Information sheet
for more information.
1. Pull the lever tight against the handlebar.
2. Wrap the Velcro safety strap around the lever and handlebar,
pull it tight, then fasten it.
Clutch Lever Strap: to
prevent unwanted launching.

NEED ADDITIONAL HELP?

Contact Technical Support for questions related to product
installation, tuning, and performance.
Technical Support hours:
Monday thru Friday: 8:00 a.m. - 5:00 p.m.
Mountain Time zone
Phone: (208) 426-0659
Email: tech@rekluse.com
• Additional contact information can be found in the User's
Guide.
Pg. 40
Brake Lever Strap: for use
as a parking brake.
Doc ID: 191-6206A
Doc Rev: 062818