Table of Contents
Advertisement
8. Reinstall the OE Belleville washer with the cup-side facing
up on top of the OE center clutch nut.
9. While keeping the OE Belleville washer on the nut, reinstall
the center clutch nut onto the clutch shaft by turning it
counterclockwise. Torque to 70 ft-lb (94 N-m). Be sure to
keep the washer indexed as you tighten the nut.
10. Remove the wedge tool.
Pg. 20
Doc ID: 191-6206A
Doc Rev: 062818
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreEXP 3.0 and is the answer not in the manual?