Rekluse CoreEXP 3.0 Installation Manual page 16

2. Preheat a conventional oven to 350°F (175°C), then place the
OE basket in the oven for 15 minutes.
The basket will be HOT! Be sure to wear protective covering
on your hands when handling the basket.
3. Wearing protective covering on your hands, remove the
basket from the oven. Immediately install the Rekluse center
hub into the OE basket. Use the press if needed to press the
hub into the basket. Let the basket cool.
Note: This thermal fit may allow for the Rekluse center hub to
slide into the basket bearing without the need of a press.
Pg. 16
Doc ID: 191-6206A
Doc Rev: 062818