Rekluse CoreEXP 3.0 Installation Manual page 32

b) Stretch the included
rubber band between
your thumbs, then place
the top end of the rubber
band on the outer end of
the left handlebar grip.
c) While holding the top
end of the rubber band
against the handlebar,
stretch the band
downward, then loop it
through itself.
d) Pull the band through
the loop, then attach it
to the outside end of the
clutch lever. This will
take up the initial free
play (slack) and put the
lever in a position to
detect the Free Play
Gain.
e) While still in NEUTRAL, quickly rev the engine between
3,000-5,000 RPM (1/4 to 1/2 throttle), then let it return to
idle. Notice the movement in the clutch lever when the
engine is revved. This is your Free Play Gain.
Note: It is very important the motor returns to idle before revving
the engine again or Free Play Gain will not be correct.
Pg. 32
Doc ID: 191-6206A
Doc Rev: 062818