Table of Contents
Advertisement
FINISH INSTALLATION
1. Reinstall the OE clutch actuating mechanism spring by
pressing it onto the lock nut in the clutch actuating
mechanism.
2. Reinstall the gasket for the OE derby cover, then install the
derby cover. Lightly applying grease to the o-ring can help
hold it in place when installing the derby cover.
3. Torque the bolts to 40 in-lb (4.5 N-m).
Doc ID: 191-6206A
Doc Rev: 062818
Pg. 25
Advertisement
Table of Contents
Need help?
Do you have a question about the CoreEXP 3.0 and is the answer not in the manual?