Displaying The Status Of Installed Power Supplies - Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual

The Summit 1100 W AC PSU-FB power supply (Model 10941) is compatible with the X450-G2 PoE and
X465 PoE (-48P, X465-48W, X465-24MU, X465-24MU-24W, X465-24W) switch models.
The Summit 1100 W AC power supplies have a keyed power inlet (C16) that requires a notched (C15)
power cord.
The Summit 1100 W AC power supplies have the status LEDs listed in
Table 48: Summit 1100 W AC Power Supply LED Status Indications
IN_OK OUT_OK
(Green) (Green/RED)
Off Off
On Off
On (Red) On
On (Green) On
Summit 1100 W DC Power Supplies
Summit 1100 W DC power supplies are available in the following models:
•
1100 W DC PSU-FB (Model 10962)—DC power supply with front-to-back ventilation airflow
•
1100 W DC PSU-BF (Model 10963)—DC power supply with back-to-front ventilation airflow
These power supplies are compatible with X690 and X870 switches that have the same airflow
direction as the power supply.
The Summit 1100 W power supplies have the status LEDs listed in
Table 49: Summit 1100 W DC Power Supply LED Status Indications
IN_OK OUT_OK (Green
(Green) or Red)
Off Off
On Off
On (Red) On
On (Green) On

Displaying the Status of Installed Power Supplies

Using the show power command, you can view detailed information about the power supplies your
switch is using. This status information may be useful for your technical support representative if you
have a network problem.
The switch collects the following power supply information:
ExtremeSwitching and Summit Switches: Hardware Installation Guide
Description
No AC input power connection or low AC voltage.
AC input good, 54V output disabled.
AC input good, output (54V) fault.
AC input good, DC outputs in spec.
Description
No DC input power connection or low DC voltage
DC input good; output disabled
DC input good; output fault
DC input good; output good
Power Supplies for Use with Your Switch
Table 48.
Table 49.
111