Appendix B: Safety And Regulatory Information; Considerations Before Installing - Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual

B
Safety and Regulatory Information

Considerations Before Installing

General Safety Precautions
Maintenance Safety
Fiber Optic Ports and Optical Safety
Cable Routing for LAN Systems
Installing Power Supply Units and Connecting Power
Selecting Power Supply Cords
Battery Notice
Battery Warning - Taiwan
EMC Warnings
Japan (VCCI Class A)
Korea EMC Statement
Warning
Read the following safety information thoroughly before installing Extreme Networks
products. Failure to follow this safety information can lead to personal injury or damage to the
equipment.
Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 3260) should
install, replace, or perform service to Extreme Networks switches and their components. Qualified
personnel have read all related installation manuals, have the technical training and experience
necessary to be aware of the hazards to which they are exposed in performing a task, and are aware of
measures to minimize the danger to themselves or other persons.
If you are located in the United States, install the system in accordance with the U.S. National Electrical
Code (NEC).
Considerations Before Installing
Consider the following items before you install equipment.
•
For equipment designed to operate in a typical Telco environment that is environmentally controlled,
choose a site that has the following characteristics:
•
Temperature-controlled and humidity-controlled, such that the maximum ambient room
temperature shall not exceed 50°C (122ºF).
•
Clean and free from airborne materials that can conduct electricity.
•
Well ventilated and away from sources of heat including direct sunlight.
ExtremeSwitching and Summit Switches: Hardware Installation Guide 396