Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual page 324

Table 107: Power Specifications (continued)
X440-G2-12t8fx-GE4
X440-G2-24t-GE4
The following power specifications pertain to all X440-G2 switches, both PoE and non-PoE.
Table 108: Power Specifications: Fixed Internal Power Supply
Voltage input range
Line frequency range
Power supply input socket
Power cord input plug
Operating temperature
PoE + Power Budget
Table 109: PoE + Power Budget
X440-G2-12p-10GE4
X440-G2-24p-10GE4
X440-G2-48p-10GE4
External Redundant Power Supplies for Non-PoE Switches
All X440-G2 series non-PoE switches ship with one fixed internal power supply. If redundancy is
required, an external RPS can be attached to the switch.
5
Minimum is defined as idle, with no ports linked. Maximum is defined as fans high, all ports 100% traffic.
6
The power supplies will continue to operate at +/- 10% of the rated input to accommodate temporary loss of input
voltage regulation.
7
The extended temperature switches are the X440-G2-24fx-GE4, X440-G2-12p-10GE4, and X440-G2-24t-GE4.
ExtremeSwitching and Summit Switches: Hardware Installation Guide
5
Minimum Heat Minimum
Dissipation Consumption
(BTU/hr) (Watts)
108 32
76 22
100-240 VAC
47 to 63 Hz
IEC 320 C14
IEC 320 C13
0° to 60°C (extended temperature
0° to 50°C (all other switches)
Internal Power Supply
200 W
380 W
740 W
Technical Specifications
5 5
Power Maximum Heat
Dissipation
(BTU/hr)
159
130
6
External RPS
200 W - Redundant power only
380 W - Redundant power only
1440 W - Additive power
740 W - Redundant power
5
Maximum Power
Consumption
(Watts)
47
38
7
switches)
324