Extreme Networks ExtremeSwitching X440-G2 Series Hardware Installation Manual page 62

Table 15: X590 Front Panel System LEDs
Label or Type
MGMT (Management)
ACT
LK (Link)
P1, P2
(Power Supply)
F1 - F4 (Fan)
Table 16: X590 Front Panel Port LEDs
Location
Ports 1-24
Ports 25-28
ExtremeSwitching and Summit Switches: Hardware Installation Guide
Color/State
Steady green
Blinking green
Blinking amber
Off
Blinking green
Off
Steady green
Off
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Speed Color/State
10Gb/1Gb Steady green
Blinking green
Off
40Gb Steady blue
(no partition)
Blinking blue
Off
10Gb Steady green
(partitioned)
Blinking green
Off
ExtremeSwitching Switches
Meaning
Normal operation
Power-on self test (POST) passed
POST or diagnostics in progress
Any of the following:
•
POST failed
•
System overheated
•
Power supply failed
•
Fan unit failed
No power
Management port packet transmitting or receiving
No packet transmitting or receiving
Management port link up
No link up or port disabled
Power on
Any of the following:
•
Power supply failure
•
Over voltage
•
Over current
•
Over temperature
Power off; no power attached
Normal operation; all diagnostics pass
Fan module failure
No power to fan module
Meaning
Link OK
Port transmitting or receiving
No link, or port disabled
Link OK
Port transmitting or receiving
No link, or port disabled
Link OK
Port transmitting or receiving
No link, or port disabled
62